hi,
my mount Alt5 with TeenAstro control ( improved FS 2 from Koch) often aborts the meredian flip.
Thanks in advance
Edmund
[03/31/21 03:35:23.732][DEBUG][Pier Flip Thread][SQ;MF;] PHD2 GetPhdStatus - Post-Wait: Stopped
[03/31/21 03:35:23.732][DEBUG][Pier Flip Thread][SQ;MF;] PHD2: Successfully stopped PHD2…
[03/31/21 03:35:23.732][DEBUG][Pier Flip Thread][SQ;MF;] Meridian Flip: Sending Telescope command to execute meridian flip
[03/31/21 03:35:23.743][DEBUG][Telescope Thread][SQ;MF;] ASCOM Telescope: Pier side is West
[03/31/21 03:35:23.744][DEBUG][Telescope Thread][SQ;MF;] ASCOM Telescope: attempting pier flip using sideOfPier
[03/31/21 03:35:23.758][DEBUG][Telescope Thread][SQ;MF;] Setting Pier East
[03/31/21 03:35:23.788][DEBUG][Telescope Thread][SQ;MF;] ASCOM Telescope: Waiting until pier side changes…
[03/31/21 03:35:24.790][DEBUG][Telescope Thread][SQ;MF;] ASCOM Telescope: Side of pier changed, waiting for scope to report it’s done slewing…
[03/31/21 03:35:24.892][DEBUG][Telescope Thread][SQ;MF;] ASCOM Telescope: Scope to reports it’s done slewing…
[03/31/21 03:35:24.892][DEBUG][Telescope Thread][SQ;MF;] ASCOM Telescope: Settling scope 15 seconds…
[03/31/21 03:35:39.895][DEBUG][Telescope Thread][SQ;MF;] ASCOM Telescope: Pier side is West
[03/31/21 03:35:40.395][DEBUG][Telescope Thread][SQ;MF;] ASCOM Telescope: Failed to flip because starting pier side and ending pier side are the same!
[03/31/21 03:35:41.898][DEBUG][Telescope Thread][SQ;MF;] Telescope thread is IDLE…
[03/31/21 03:35:41.946][DEBUG][Pier Flip Thread][SQ;MF;] Meridian Flip: Telescope command to meridian flip has completed
[03/31/21 03:35:41.947][DEBUG][Pier Flip Thread][SQ;MF;] Meridian Flip: Telescope failed to perform meridian flip
[03/31/21 03:36:41.770][DEBUG][Main Thread][SQ;MF;] PopulateDataModel: Transferring view to the data model…
[03/31/21 03:36:41.784][DEBUG][MF Update Thread][SQ;MF;] Performing serialize…
[03/31/21 03:37:21.379][DEBUG][Main Thread][SQ;] Adding sequence level notification: Failed to complete automatic meridian flip, aborting sequence!
[03/31/21 03:37:21.417][DEBUG][Sequence Thread][SQ;] Sending Notification: Error - Failed to complete automatic meridian flip, aborting sequence!
[03/31/21 03:37:21.428][DEBUG][Pier Flip Thread][SQ;] Meridian Flip: Procedure complete
[03/31/21 03:38:22.875][DEBUG][Sequence Thread][SQ;] Blocking Pier Flip: Failed to meridian flip, aborting sequence (True)
[03/31/21 03:38:22.875][DEBUG][Sequence Thread][SQ;] Aborting sequence: Failed to meridian flip
[03/31/21 03:38:22.875][DEBUG][Sequence Thread][SQ;] Set sequence abort
Link to Logs
Approx time of issue: 31.03.2021 03:37
Useful Info
OS: Microsoft Windows 10 Home
Ver: 4.0.0.661
.NET: 4.8
ASCOM: 6.5.1.3234