Looking at your log file, Marcelo, ASTAP seems to be solving the image just fine, although you seem to have a settling time of only 1 second, which seems a bit low - my settling time after a slew is 10 seconds just to be on the safe side, so I would first try increasing the settling time. If that has no effect, I’d double-check that everything is set correctly in EQMOD, as EQMOD has a pointing model system that must be turned off - see this thread - Help from EQMOD users - Sequence Generator - Main Sequence Software (sequencegeneratorpro.com). The main take-away from it was:
A) Don’t use any pointing model at all. Let plate solve manage the whole alignment process.
B) Use EQMOD version 1.28m and set the side of pier option to “pointing”
C) Do not enable meridian flip in the eqmod software. Let sgpro manage the process.
D) Set the meridian flip at 2 degrees past meridian.
E) Set the mount meridian software limits at greater than 2 degrees.
F) Set the epoch in the mount as J2000
G) Alignment/sync user interface set to “dialog based”.
Apologies if you have already checked all of this - I’m not sure what else to suggest.