AAG SOLO start sequence on UNSAFE

Sequence Generator
1

I use AAG-cloudwatcher SOLO Lunatico with SGPpro
it gives well the UNSAFE info red dot at the bottom right, if clouds or other.

But the problem is that SGP lets the sequence start?
yes despite the UNSAF he opens the roof, goes on the target, turns the dome
and there
UNSAFE triggers and everything closes automaticly and well

But normally SGP should not open and start the beginning of the sequence if UNSAFE

Do you know why it closes only after
I can’t find in which config?

Merci
JPaul

2

@DESGREES When the safety monitor reports unsafe, SGPro is designed to start the sequence and await safe conditions. It is important to note that this will only work if you enabled the setting to do this. Otherwise the safety monitor’s status is just information for you and not considered by SGPro. Please see here:

https://help.sequencegeneratorpro.com/RestartSequenceonSafe.html

If you do have this option enabled, we will need to get logs and can send you instructions for that.

3

OK I just tried it seams working well now
it was red unsafe with clouds here SGP do not open roof and showed an alarm

Merci for your help
JPaul

4

Bonsoir,
I just tried , it seams working well
I launch a sequence with red Unsafe (we have clouds today) and SGP did not start and I got Alarm Unsafe

Merci for your help
Jean-Paul