Increase flat exposure accuracy

Hi SGP team,
the current accuracy is only 2 decimal places. With high gain, it is difficult to find the right setting.

For example with my camera at intermediate gain with a Lum filter and my flat box, I have to set an exposure time of 0.015s. I can do it manually directly in the sequence but it’s not possible in the flat setting of the “Filter setup” screen.
I can’t decrease the brightness of the flat box because otherwise I’ll overly increase the flats duration of the low gain narrow band filters.
Also, the Flat Calibration Wizard tool is limited to this 2nd decimal place which does not allow to handle all situations.

Access to a 3rd decimal place would be appreciated.

1 Like