SGP successfully completed a meridian flip and then proceeded to continue through the imaging session. However, at the send of the scheduled images, when the telescope was commanded to the Park Position, it only slewed a short while and stopped before the Park Position was reached. SGP also disconnected the mount. I used the SKYX ASCOM driver to control my Paramount MEII.
It’s hard to tell what is happening because SGPro’s visibility of the mount and drivers state is limited. What I can say is that starting at 22:57 the driver starts auto-disconnecting itself from SGPro. SGPro has protections against this and automatically attempts to re-establish the connection. This seems to work ok, but between 22:57 and 3:30, the driver disconnects itself from SGPro 18 times. The park failed because near the end, SGPro was unable to repair the connection.