SGP slews dome again

Sequence Generator SGPro Support
1

Hello,
I have installed the lastest 4.2.0.936 and now SGP slews the dome again even if the dome has been configured as roll of roof. Can you please fix this soon and do not slew the dome in this configuration.

[12/27/22 20:46:48.546][DEBUG][Sequence Thread][SQ;] Telescope: Slew received J2000 coordinates, mount requires JNOW, converting…
[12/27/22 20:46:48.546][DEBUG][Sequence Thread][SQ;] Telescope: Slewing to JNOW RA: 0,735395539725355 Dec: 41,4235214796504
[12/27/22 20:46:48.546][DEBUG][Sequence Thread][SQ;] Telescope: Calling Observatory Slave Slew
[12/27/22 20:46:48.546][DEBUG][Sequence Thread][SQ;] DestinationSideOfPier Received from telescope as pierEast
[12/27/22 20:46:48.587][DEBUG][Sequence Thread][SQ;] Observatory: Calculating new position using:
[12/27/22 20:46:48.587][DEBUG][Sequence Thread][SQ;] Azimuth: 267,963528024009
[12/27/22 20:46:48.587][DEBUG][Sequence Thread][SQ;] Altitude: 63,3449676102111
[12/27/22 20:46:48.587][DEBUG][Sequence Thread][SQ;] Hour Angle: 37,1187575561683
[12/27/22 20:46:48.587][DEBUG][Sequence Thread][SQ;] Pier Side: East
[12/27/22 20:46:48.587][DEBUG][Sequence Thread][SQ;] Observatory: Adjustment needed, slewing to Azimuth: 267,963528018864
[12/27/22 20:47:27.962][DEBUG][Sequence Thread][SQ;] Scope reports it is done with synchronous slew, verifying…

Dietmar

2

Please include either logs or the sequence

3

logs attached

Link to Logs

Useful Info

OS: Microsoft Windows 10 Pro
Ver: 4.2.0.936 (64-bit)
.NET: 4.8
ASCOM: 6.6.1.3557

4

I have now changed the observatory to dome and back to roll off roof and now SGP does not slew the dome anymore. This is solved (until the next update?).
Dietmar

5

I honestly have no idea. For the observed issue, SGPro was confused because the type was specified as roll off roof, but the driver for it reported that it was capable of altering azimuth. Maybe a setting in ScopeDomeUSBDome Local Server?

[12/27/22 16:16:47.580][DEBUG][Main Thread][NONE] Dome: CanSetAzimuth is true
6

It is a dome therefore the driver will report this capability. But since I have an Alt/Az mount I must calculate the correct azimuth for the dome outside of SGP and send it to the dome to sync with the scope.
Dietmar