@gdunham,
I would stick with latest 2.6 version for now - it should work. I don’t have a Paramount, so can’t help you on that end. For AstroMC, just need to make sure the “ASCOM connected” box is checked:
In SGP, you will need to select the “AstroMC Dome Driver” in the Sequencer window, as well as your Paramount ASCOM driver for the Telescope:
You will need to decide whether you want AstroMC to do the slaving (and dome geometry calcs) or SGP. Recently I have been letting SGP do that. In the Control Panel window I normally set as this:
And you will need to ensure the Telescope is “Unparked”:
A good test to ensure it is all working as intended, you could set up a sequence but manually do a “Slew Now” (telescope and dome should both slew) and “Center Now” before starting the sequence.
Hope this helps.
And … 15min unguided subs … envy :=)
DaveNL