Heart Nebula mosaic tile transition issue

[Jared]

@SBeers

During each transition between tiles and during the meridian flip, the plate solve failed multiple times. I had to abort, disconnect all equipment, reboot the laptop before it would finally resolve the plate solve and begin the tiles imaging.

What solver are you using? Are you using Blind Solve Failover?

@SBeers

In addition, at the beginning of the sequence (tile#1) the plate solver had me rotating the camera alternating clockwise and counterclockwise repeatedly around essentially the same point.

It could be a setup issue with the “Manual Rotator” if you’re bouncing back and forth between values and you don’t feel you’re over rotating. Also what kind of optics are you shooting through? Maybe something is flipped or reversed and we’re not detecting it properly.

@SBeers

Can you give me some insights into what might have happened? Is there a known issue with that target? Should I recreate the plan? Or??

Hard to know exactly what transpired. If you happen to have a log that may shed some insight on the issue.

How to report issues or ask for help

Hi folks, In order to expedite your requests for help, we politely ask that, before posting, you take a look through the help file to see if it answers your question. One is installed with every copy of SGPro and has search functionality. Finally take a look through the forum (using forum search) to see if others have experienced a similar problem. If you still can’t figure out how to resolve your issue, by all means, ask for help. Here’s how: As a general rule, when requesting help: Cre…

Jared