SGP-Hangs During Mount Calibration sequence step

Sequence Generator SGPro Support
1

I have an odd issue I never had before.

Gear: AP Stowaway + Ap Reducer + OAG-L + Filter Wheel + ZWO 2600MM + 290MM mini + AP Mach 1

Software: SGP + PHD2 + Pegasus Advance V2 box (latest fimware versions)

  1. All equipment successfully connects

  2. Sequence starts successfully → focus sequence step is a success → plate and solve step is a success → calibration initiates and completes and begins to guide ON PHD2 side of the software, However on SGP it just hangs on “forcing calibration” and it hangs and hangs unitil i just forcibly reset/stop sequence. Oddly i also notice that RA & DEC shows 0.00 but guiding graph plots data as its guiding.

-Another odd thing is if I stop and start the guiding on PHD2 side of things it triggers the sequence on SGP. At this point i am deducing something is happening to guide camera? its disconnecting? Again I hope this makes sense to someone. I tried to explain this short and sweet and to the point.

I cant seem to attache PHD2 log due to size…

Link to Logs

Useful Info

OS:
Ver:

2

Hi there, at the very least, we would need SGPro logs to help. Please see here for instructions on how to do this.